
PESA 45AFR / 45SFR Compact Filter-Regulator
1/4" NPT, up to 14 bar Supply
- Бренд:
- PESA (Pishro Sanat)
- Код товара:
- 100086
PESA 45AFR (aluminium body) and 45SFR (stainless steel body) compact filter-regulators that deliver clean, regulated air to instruments, controls and pneumatic devices; supply up to 14 Barg, three output ranges up to 8.6 Barg and 20 SCFM capacity. Supplied to order, price on request.
- Regulated output pressure ranges0-35 PSI (0-2.4 Barg) · 0-60 PSI (0-4.1…
- Range spring and draincockCarbon steel (C/S)
- Ambient temperature-20°F to +150°F (-29°C to +66°C)
Описание
Галерея продукта

- Instrument air supply to instruments and controls
- Automatic machinery
- Pneumatic devices and circuits
- Panel mounting (tapped bonnet) in control assemblies
Ключевые особенности
PESA (Pishro Sanat)P(SЭтот раздел доступен только на английском языке
- Compact body with 1/4" NPT connections and a shipping weight of only…
- Filter and relief combined in one unit.
- Three output pressure ranges: 0-35, 0-60 and 0-125 PSI (up to 8.6…
- 20 SCFM capacity at 100 PSI supply and 0.2 PSI sensitivity.
- Four filter options, including a 40 micron stainless steel version…
- A 12-character order code defines the full configuration, with a…
Типовые применения
Посмотреть все примененияInstrument air supply to instruments and controls
Automatic machinery
Pneumatic devices and circuits
Panel mounting (tapped bonnet) in control assemblies
Описание товара
Этот раздел доступен только на английском языке
PESA 45AFR (aluminium body) and 45SFR (stainless steel body) compact filter-regulators that deliver clean, regulated air to instruments, controls and pneumatic devices; supply up to 14 Barg, three output ranges up to 8.6 Barg and 20 SCFM capacity. Supplied to order, price on request.
The 45AFR / 45SFR compact filter-regulators are made by Pishro Sanat Amal Co. LTD (Tehran, Iran) under the PESA brand and are used to provide clean, regulated air pressure to instruments, controls, automatic machinery and other pneumatic devices. The 45AFR has an aluminium body and the 45SFR a stainless steel body; both combine a filter (F) with relief (R).
Principle of operation
Turning the adjust screw changes the force the range spring exerts on the diaphragm assembly. If the output pressure rises above the set pressure, the diaphragm adaptor lifts from the plunger and vents the excess pressure to atmosphere until equilibrium is reached; if it drops below, the range spring unseats the plunger and supply pressure flows to the downstream port until the set pressure is restored.
Key specifications
Maximum supply pressure is 200 PSI (14 Barg) and the connections are 1/4" NPT. Three regulated output ranges are offered: 0-35 PSI (0-2.4 Barg), 0-60 PSI (0-4.1 Barg) and 0-125 PSI (0-8.6 Barg). Flow capacity at a 100 PSI (6.9 Barg) supply is 20 SCFM (0.566 m³/min), sensitivity is 0.2 PSI (1.4 kPa), ambient range is -29 to +66°C and approximate shipping weight is 950 g. Body and bonnet are aluminium (stainless steel by order), the diaphragm is NBR, the plunger is stainless steel with an NBR seat, and the range spring and draincock are carbon steel.
Order coding
The order code is 12 characters and defines the filter (10 micron cellulose, 40 micron stainless steel, 40 micron stainless steel cleaned for oxygen service, or the standard 35 micron polypropylene), bonnet type, adjustment (handwheel, wrench screw or preset), diaphragm material, gauge and pressure range; example: 45AFR X T S E X 1 F. Supply is to order and the price is on request. Every figure on this page comes from the official PESA datasheet (2024).
Технические характеристики
| Параметр | Значение |
|---|---|
| Manufacturer | Pishro Sanat Amal Co. LTD (PESA), Tehran, Iran |
| Device type | Compact filter-regulator (with filter and relief) |
| Models | 45AFR (aluminium body) · 45SFR (stainless steel body) |
| Maximum supply pressure | 200 PSI (14 Barg) |
| Connections | 1/4" NPT |
| Regulated output pressure ranges | 0-35 PSI (0-2.4 Barg) · 0-60 PSI (0-4.1 Barg) · 0-125 PSI (0-8.6 Barg) |
| Flow capacity (100 PSI / 6.9 Barg supply) | 20 SCFM (0.566 m³/min) |
| Sensitivity | 0.2 PSI (1.4 kPa) |
| Ambient temperature | -20°F to +150°F (-29°C to +66°C) |
| Approximate shipping weight | 2.1 lbs (950 g) |
| Body and bonnet | Aluminium (stainless steel by order) |
| Diaphragm / plunger | NBR diaphragm; stainless steel plunger with NBR seat |
| Range spring and draincock | Carbon steel (C/S) |
| Filter options | Polypropylene 35 micron (standard), cellulose 10 micron (5 micron nominal air filtration), stainless steel 40 micron, stainless steel 40 micron cleaned for oxygen service |
| Order options | Bonnet: threaded (standard) or tapped for panel mounting; adjustment: wrench screw (standard), handwheel or preset; NBR or Viton diaphragm; optional 5 cm gauge (0-4 and 0-10 barg) |
Модели для заказа
Модели-сёстры из этого семейства — информационные, не из склада.
Этот раздел доступен только на английском языке
| Код модели | Описание | Диапазон измерений |
|---|---|---|
| 45AFRXTSEX1C | 45AFR — 0-35 PSI outputStandard configuration, aluminium body, 0 to 2.4 Barg | 0-35 PSI |
| 45AFRXTSEX1F | 45AFR — 0-60 PSI outputStandard configuration, aluminium body, 0 to 4.1 Barg (datasheet example) | 0-60 PSI |
| 45AFRXTSEX1G | 45AFR — 0-125 PSI outputStandard configuration, aluminium body, 0 to 8.6 Barg | 0-125 PSI |
Все перечисленные модели могут поставляться с требуемой сертификацией, протоколом выходного сигнала и присоединением к процессу — свяжитесь с нами или запросите предложение для точного подбора кода модели.
Загрузки и документация
Области применения и отрасли
Этот раздел доступен только на английском языке
Instrument air supply to instruments and controls
Automatic machinery
Pneumatic devices and circuits
Panel mounting (tapped bonnet) in control assemblies
Отзывы
Отзывов пока нет
Будьте первым, кто оставит отзыв об этом продукте.
Часто задаваемые вопросы
Этот раздел доступен только на английском языке
What is the difference between 45AFR and 45SFR?
The 45AFR has an aluminium body and the 45SFR a stainless steel body (S = SS); both include a filter and relief (F and R). The datasheet gives no separate specifications for the 45SFR, which appears only in the order code, and it does not state the stainless steel grade. Stainless steel body and bonnet are listed in the materials table as "by order".
What are the output pressure ranges and the supply pressure?
Maximum supply pressure is 200 PSI (14 Barg). Output pressure is regulated in three ranges: 0-35 PSI (code C), 0-60 PSI (code F) and 0-125 PSI (code G), equal to 0-2.4, 0-4.1 and 0-8.6 Barg.
How do I read the 12-character order code?
Characters 1 to 5: 45AFR or 45SFR. 6 filter: A cellulose 10 micron, B stainless steel 40 micron for oxygen service, C stainless steel 40 micron, X polypropylene 35 micron (standard). 7 bonnet: F tapped for panel mounting, T threaded (standard). 8 adjustment: H handwheel, S wrench screw (standard), P preset. 9 diaphragm: E NBR with relief (standard), F Viton no bleed and no relief, J Viton with relief, M NBR no bleed and no relief. 10 gauge: X no gauge (standard), Y 5 cm gauge. 11 end cover: 1. 12 range: C, F or G. Example: 45AFR X T S E X 1 F.
Is any certification or standard stated?
No. The datasheet states no certification or standard for this device; if you need a specific certificate, say so when enquiring so that it can be asked of the manufacturer.
Почему покупать проверенный сток у Barmaan
- Проверено и протестировано перед отправкой
- Функциональная гарантия 30 дней
- Подлинность проверена по шильдику и коду заказа
- Поставка под заказ — срок подтверждается в ответе на запрос
- Доставка на место объекта
- Послепродажная поддержка

