
Endress+HauserProline Promag W 400
Расходомеры
HART, PROFIBUS DP, EtherNet/IP, Modbus RS485; 0/4–20 mA HART…
1 / 4SM6000, SM7000, SM8000, SM8020
Compact magnetic-inductive flow meters from ifm electronic for conductive, water-based liquids: four models by connection size (G½ to G1) and range (up to 25, 50, 100 and 150 l/min), each with display, switching, analog and pulse outputs and IO-Link. Choose the model on this page; one product, four variants.
Цена
Нет в наличии — запросите предложение на поставкуОтправьте запрос, чтобы узнать цену.



Этот раздел доступен только на английском языке

Water and wastewater: monitoring of flow and consumption in…

Cooling-water and chilled-water circuits of machines and…
Dosing and batching of conductive liquids with the…
Industrial plants with PLC integration through analog…
Этот раздел доступен только на английском языке
Compact magnetic-inductive flow meters from ifm electronic for conductive, water-based liquids: four models by connection size (G½ to G1) and range (up to 25, 50, 100 and 150 l/min), each with display, switching, analog and pulse outputs and IO-Link. Choose the model on this page; one product, four variants.
The SM series from ifm electronic is a family of compact magnetic-inductive flow meters (magmeters) for conductive liquids, water and water-based media. Because the measurement works without moving parts in the flow path, the stainless-steel process section stays free of rotors and wear parts. A single device reports volumetric flow and totalised quantity, and the SM6000 datasheet also gives medium-temperature monitoring.
Four models cover the range: SM6000 (G½, DN15, 0.1…25 l/min), SM7000 (G¾, DN20, 0.2…50 l/min), SM8000 (G1, DN25, 0.2…100 l/min) and SM8020 (G1, DN25, 0.2…150 l/min). The first three share a tubular housing, 18…30 V DC supply and an accuracy of ± (0.8 % of measured value + 0.5 % of range end value); the SM8020 uses a rectangular housing with a 1.44″ colour display, a medium temperature range of −20…90 °C and ± (0.8 % MW + 0.2 % MEW).
Each model provides two switching outputs, an analog output (4…20 mA or 0…10 V), a pulse output and IO-Link (revision 1.1) on an M12 connector; the SM8020 adds a frequency signal. Pressure rating is 16 bar and protection is IP 67. The datasheets and operating instructions published by ifm are attached below; every figure on this page comes from those documents and from the ifm product pages.
| Параметр | Значение |
|---|---|
| General | |
| Manufacturer | ifm electronic gmbh, Essen, Germany |
| Device type | Magnetic-inductive flow meter (magmeter) for conductive, water-based liquids, with display and IO-Link |
| Models on this page | SM6000 (G½, DN15) · SM7000 (G¾, DN20) · SM8000 (G1, DN25) · SM8020 (G1, DN25, colour display) |
| Media | Conductive liquids, water, water-based media; conductivity ≥ 20 µS/cm, viscosity < 70 mm²/s (40 °C) |
| Measurement | |
| Measuring range | SM6000: 0.1…25 l/min (0.005…1.5 m³/h) · SM7000: 0.2…50 l/min (0.01…3 m³/h) · SM8000: 0.2…100 l/min (0.01…6 m³/h) · SM8020: 0.2…150 l/min (0.012…9 m³/h) |
| Accuracy (flow) | SM6000 / SM7000 / SM8000: ± (0.8 % of measured value + 0.5 % of range end value) · SM8020: ± (0.8 % MW + 0.2 % MEW) |
| Repeatability | ± 0.2 % of range end value (all four models) |
| Temperature monitoring (SM6000) | Measuring range −20…80 °C, resolution 0.2 °C, accuracy ± 2.5 K (Q > 1 l/min) per the SM6000 datasheet |
| Electrical and outputs | |
| Supply voltage / current | 18…30 V DC (SELV/PELV), protection class III · 95 mA at 24 V (SM6000/7000/8000), < 80 mA (SM8020) |
| Outputs | Configurable: switching signal (PNP/NPN, 2 outputs), analog 4…20 mA or 0…10 V (scalable), pulse signal, IO-Link; SM8020 additionally frequency signal |
| IO-Link | IO-Link revision 1.1 (IEC 61131-9 SDCI), SIO mode; operation by buttons or parameter setting via IO-Link |
| Electrical connection | 1 × M12, A-coded, 4 contacts, gold-plated |
| Mechanical and environment | |
| Process connection | Threaded, external thread, flat seal: SM6000 G½ (DN15) · SM7000 G¾ (DN20) · SM8000 and SM8020 G1 (DN25) |
| Medium temperature / pressure rating | SM6000/7000/8000: −10…70 °C · SM8020: −20…90 °C · all: 16 bar (1.6 MPa) |
| Installation length (straight pipe) | SM6000/7000/8000: inlet 3 × DN, outlet 1 × DN · SM8020: no inlet or outlet pipe length required (manufacturer page) |
| Wetted materials | SM6000/7000/8000: stainless steel 1.4404/316L, PEEK, FKM · SM8020: pipe section 1.4404/316L, NBR fibre-reinforced gasket, FKM, PEEK, carbon-fibre PEEK |
| Display | SM6000/7000/8000: 4-digit alphanumeric display, 6 green unit LEDs, 2 yellow switching-status LEDs · SM8020: 1.44″ colour display 128 × 128 px with red/green colour change, 2 yellow LEDs |
| Ambient temperature / protection | SM6000/7000/8000: −10…60 °C, IP 67 · SM8020: −20…60 °C, IP 65 / IP 67 |
| Dimensions / weight | SM6000/7000/8000: Ø 54 × L 110 mm, 544 g / 587 g / 577 g · SM8020: 110 × 48 × 73 mm, 782 g |
Модели-сёстры из этого семейства — информационные, не из склада.
Этот раздел доступен только на английском языке
| Код модели | Описание | Диапазон измерений |
|---|---|---|
| SM6000 | ifm SM6000 — G½ (DN15), up to 25 l/minSmallest size of the family: 0.1…25 l/min, accuracy ± (0.8 % MW + 0.5 % MEW), 544 g. Also monitors medium temperature. | 0.1…25 l/min |
| SM7000 | ifm SM7000 — G¾ (DN20), up to 50 l/minSame housing as SM6000 with a G¾ connection: 0.2…50 l/min, 587 g. | 0.2…50 l/min |
| SM8000 | ifm SM8000 — G1 (DN25), up to 100 l/minSame housing with a G1 connection: 0.2…100 l/min, 577 g. | 0.2…100 l/min |
| SM8020 | ifm SM8020 — G1 (DN25), up to 150 l/min, colour displayNewer rectangular housing: 0.2…150 l/min, accuracy ± (0.8 % MW + 0.2 % MEW), medium −20…90 °C, colour display, no straight inlet/outlet pipe required, 782 g. | 0.2…150 l/min |
Все перечисленные модели могут поставляться с требуемой сертификацией, протоколом выходного сигнала и присоединением к процессу — свяжитесь с нами или запросите предложение для точного подбора кода модели.
Этот раздел доступен только на английском языке

Water and wastewater: monitoring of flow and consumption in…

Cooling-water and chilled-water circuits of machines and…
Dosing and batching of conductive liquids with the…
Industrial plants with PLC integration through analog…
Отзывов пока нет
Будьте первым, кто оставит отзыв об этом продукте.
Этот раздел доступен только на английском языке
Conductive liquids, water and water-based media with a conductivity of at least 20 µS/cm and a viscosity below 70 mm²/s at 40 °C. They are not meant for non-conductive media such as oils.
By connection size and flow range: SM6000 G½ up to 25 l/min, SM7000 G¾ up to 50 l/min, SM8000 G1 up to 100 l/min, SM8020 G1 up to 150 l/min. SM8020 adds a colour display, a wider medium temperature range (−20…90 °C) and a tighter end-value error (0.2 % MEW).
Switching outputs (PNP/NPN), an analog output (4…20 mA or 0…10 V, scalable), a pulse output and IO-Link; the SM8020 also offers a frequency signal. The output function is configurable.
For SM6000, SM7000 and SM8000 the datasheets give an inlet length of 3 × DN and an outlet length of 1 × DN. The manufacturer page for the SM8020 states that no inlet or outlet pipe length is required.
Condition, availability and warranty depend on the unit you order; ask Barmaan for a quote and the exact order code. The datasheets and manuals below are the manufacturer’s own documents.

Расходомеры
HART, PROFIBUS DP, EtherNet/IP, Modbus RS485; 0/4–20 mA HART…

Расходомеры
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

Расходомеры
HART, Modbus RS485, IO-Link; 4–20 mA; pulse/frequency/switch…

Расходомеры
4–20 mA HART + Pulse/Frequency (I-OUT, f-OUT)
Отправка в течение 1 дня
от 4 000 $

Расходомеры
M-Bus, wireless M-Bus, Modbus, BACnet, LoRa … (2 module slots)

Расходомеры
LTE Cat M1, Cat NB1, Cat NB2, GPRS, EGPRS; Modbus RS485; 3x…

Расходомеры
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

Расходомеры

Расходомеры
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…
Калибровка, испытания и поставка для этого оборудования