
Endress+HauserProline Promag W 400
流量计
HART, PROFIBUS DP, EtherNet/IP, Modbus RS485; 0/4–20 mA HART…
1 / 4SM6000, SM7000, SM8000, SM8020
Compact magnetic-inductive flow meters from ifm electronic for conductive, water-based liquids: four models by connection size (G½ to G1) and range (up to 25, 50, 100 and 150 l/min), each with display, switching, analog and pulse outputs and IO-Link. Choose the model on this page; one product, four variants.



本节目前仅提供英文版本

Water and wastewater: monitoring of flow and consumption in…

Cooling-water and chilled-water circuits of machines and…
Dosing and batching of conductive liquids with the…
Industrial plants with PLC integration through analog…
本节目前仅提供英文版本
Compact magnetic-inductive flow meters from ifm electronic for conductive, water-based liquids: four models by connection size (G½ to G1) and range (up to 25, 50, 100 and 150 l/min), each with display, switching, analog and pulse outputs and IO-Link. Choose the model on this page; one product, four variants.
The SM series from ifm electronic is a family of compact magnetic-inductive flow meters (magmeters) for conductive liquids, water and water-based media. Because the measurement works without moving parts in the flow path, the stainless-steel process section stays free of rotors and wear parts. A single device reports volumetric flow and totalised quantity, and the SM6000 datasheet also gives medium-temperature monitoring.
Four models cover the range: SM6000 (G½, DN15, 0.1…25 l/min), SM7000 (G¾, DN20, 0.2…50 l/min), SM8000 (G1, DN25, 0.2…100 l/min) and SM8020 (G1, DN25, 0.2…150 l/min). The first three share a tubular housing, 18…30 V DC supply and an accuracy of ± (0.8 % of measured value + 0.5 % of range end value); the SM8020 uses a rectangular housing with a 1.44″ colour display, a medium temperature range of −20…90 °C and ± (0.8 % MW + 0.2 % MEW).
Each model provides two switching outputs, an analog output (4…20 mA or 0…10 V), a pulse output and IO-Link (revision 1.1) on an M12 connector; the SM8020 adds a frequency signal. Pressure rating is 16 bar and protection is IP 67. The datasheets and operating instructions published by ifm are attached below; every figure on this page comes from those documents and from the ifm product pages.
| 参数项 | 参数值 |
|---|---|
| General | |
| Manufacturer | ifm electronic gmbh, Essen, Germany |
| Device type | Magnetic-inductive flow meter (magmeter) for conductive, water-based liquids, with display and IO-Link |
| Models on this page | SM6000 (G½, DN15) · SM7000 (G¾, DN20) · SM8000 (G1, DN25) · SM8020 (G1, DN25, colour display) |
| Media | Conductive liquids, water, water-based media; conductivity ≥ 20 µS/cm, viscosity < 70 mm²/s (40 °C) |
| Measurement | |
| Measuring range | SM6000: 0.1…25 l/min (0.005…1.5 m³/h) · SM7000: 0.2…50 l/min (0.01…3 m³/h) · SM8000: 0.2…100 l/min (0.01…6 m³/h) · SM8020: 0.2…150 l/min (0.012…9 m³/h) |
| Accuracy (flow) | SM6000 / SM7000 / SM8000: ± (0.8 % of measured value + 0.5 % of range end value) · SM8020: ± (0.8 % MW + 0.2 % MEW) |
| Repeatability | ± 0.2 % of range end value (all four models) |
| Temperature monitoring (SM6000) | Measuring range −20…80 °C, resolution 0.2 °C, accuracy ± 2.5 K (Q > 1 l/min) per the SM6000 datasheet |
| Electrical and outputs | |
| Supply voltage / current | 18…30 V DC (SELV/PELV), protection class III · 95 mA at 24 V (SM6000/7000/8000), < 80 mA (SM8020) |
| Outputs | Configurable: switching signal (PNP/NPN, 2 outputs), analog 4…20 mA or 0…10 V (scalable), pulse signal, IO-Link; SM8020 additionally frequency signal |
| IO-Link | IO-Link revision 1.1 (IEC 61131-9 SDCI), SIO mode; operation by buttons or parameter setting via IO-Link |
| Electrical connection | 1 × M12, A-coded, 4 contacts, gold-plated |
| Mechanical and environment | |
| Process connection | Threaded, external thread, flat seal: SM6000 G½ (DN15) · SM7000 G¾ (DN20) · SM8000 and SM8020 G1 (DN25) |
| Medium temperature / pressure rating | SM6000/7000/8000: −10…70 °C · SM8020: −20…90 °C · all: 16 bar (1.6 MPa) |
| Installation length (straight pipe) | SM6000/7000/8000: inlet 3 × DN, outlet 1 × DN · SM8020: no inlet or outlet pipe length required (manufacturer page) |
| Wetted materials | SM6000/7000/8000: stainless steel 1.4404/316L, PEEK, FKM · SM8020: pipe section 1.4404/316L, NBR fibre-reinforced gasket, FKM, PEEK, carbon-fibre PEEK |
| Display | SM6000/7000/8000: 4-digit alphanumeric display, 6 green unit LEDs, 2 yellow switching-status LEDs · SM8020: 1.44″ colour display 128 × 128 px with red/green colour change, 2 yellow LEDs |
| Ambient temperature / protection | SM6000/7000/8000: −10…60 °C, IP 67 · SM8020: −20…60 °C, IP 65 / IP 67 |
| Dimensions / weight | SM6000/7000/8000: Ø 54 × L 110 mm, 544 g / 587 g / 577 g · SM8020: 110 × 48 × 73 mm, 782 g |
同系列的其他型号 — 仅供参考,非库存产品。
本节目前仅提供英文版本
| 型号代码 | 说明 | 测量范围 |
|---|---|---|
| SM6000 | ifm SM6000 — G½ (DN15), up to 25 l/minSmallest size of the family: 0.1…25 l/min, accuracy ± (0.8 % MW + 0.5 % MEW), 544 g. Also monitors medium temperature. | 0.1…25 l/min |
| SM7000 | ifm SM7000 — G¾ (DN20), up to 50 l/minSame housing as SM6000 with a G¾ connection: 0.2…50 l/min, 587 g. | 0.2…50 l/min |
| SM8000 | ifm SM8000 — G1 (DN25), up to 100 l/minSame housing with a G1 connection: 0.2…100 l/min, 577 g. | 0.2…100 l/min |
| SM8020 | ifm SM8020 — G1 (DN25), up to 150 l/min, colour displayNewer rectangular housing: 0.2…150 l/min, accuracy ± (0.8 % MW + 0.2 % MEW), medium −20…90 °C, colour display, no straight inlet/outlet pipe required, 782 g. | 0.2…150 l/min |
所列全部型号均可按您所需的认证、输出协议及过程连接方式供货 — 如需确定具体型号代码,请联系我们或提交询价。
本节目前仅提供英文版本

Water and wastewater: monitoring of flow and consumption in…

Cooling-water and chilled-water circuits of machines and…
Dosing and batching of conductive liquids with the…
Industrial plants with PLC integration through analog…
暂无评论
成为第一个评论此产品的人。
本节目前仅提供英文版本
Conductive liquids, water and water-based media with a conductivity of at least 20 µS/cm and a viscosity below 70 mm²/s at 40 °C. They are not meant for non-conductive media such as oils.
By connection size and flow range: SM6000 G½ up to 25 l/min, SM7000 G¾ up to 50 l/min, SM8000 G1 up to 100 l/min, SM8020 G1 up to 150 l/min. SM8020 adds a colour display, a wider medium temperature range (−20…90 °C) and a tighter end-value error (0.2 % MEW).
Switching outputs (PNP/NPN), an analog output (4…20 mA or 0…10 V, scalable), a pulse output and IO-Link; the SM8020 also offers a frequency signal. The output function is configurable.
For SM6000, SM7000 and SM8000 the datasheets give an inlet length of 3 × DN and an outlet length of 1 × DN. The manufacturer page for the SM8020 states that no inlet or outlet pipe length is required.
Condition, availability and warranty depend on the unit you order; ask Barmaan for a quote and the exact order code. The datasheets and manuals below are the manufacturer’s own documents.

流量计
HART, PROFIBUS DP, EtherNet/IP, Modbus RS485; 0/4–20 mA HART…

流量计
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

流量计
HART, Modbus RS485, IO-Link; 4–20 mA; pulse/frequency/switch…

流量计
4–20 mA HART + Pulse/Frequency (I-OUT, f-OUT)
1天内发货
起 US$4,000

流量计
M-Bus, wireless M-Bus, Modbus, BACnet, LoRa … (2 module slots)

流量计
LTE Cat M1, Cat NB1, Cat NB2, GPRS, EGPRS; Modbus RS485; 3x…

流量计
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

流量计

流量计
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…
面向此类设备的校准、检测与供应服务