
PESA (Pishro Sanat)PESA VP501 / VP501A
Промышленная арматура

Quick-Change Trim, Unbalanced Plug
PESA single-port, globe-style sliding-stem control valve with a post-guided unbalanced plug and quick-change trim, NPS 1/2 to 4, metal seating as standard and trim rated to 427°C; for non-lubricating, viscous and other hard-to-handle fluids. Supplied to order, price on request.
Цена
Нет в наличии — запросите предложение на поставкуОтправьте запрос, чтобы узнать цену.


Этот раздел доступен только на английском языке

Chemical and hydrocarbon processing
Throttling or on-off control of liquids and gases
Viscous and non-lubricating fluids
Very low-flow lines (Micro-Form / Micro-Flow plugs)
Этот раздел доступен только на английском языке
PESA single-port, globe-style sliding-stem control valve with a post-guided unbalanced plug and quick-change trim, NPS 1/2 to 4, metal seating as standard and trim rated to 427°C; for non-lubricating, viscous and other hard-to-handle fluids. Supplied to order, price on request.
The VP-201 is a valve of the VP-200 series made by Pishro Sanat Amal Co. LTD (Tehran, Iran) under the PESA brand: a single-port, globe-style sliding-stem control valve for throttling or on-off control of liquids and gases. It has a quick-change trim and a post-guided, unbalanced plug, and is used in chemical or hydrocarbon processing or wherever control of non-lubricating, viscous or other hard-to-handle fluids is required.
Metal-to-metal seating is standard for all general applications over a wide range of pressure drops and temperatures (shutoff Class IV; V and VI optional), and metal-to-PTFE seating is optional for stringent shutoff (PTFE composition: Class VI). Trim with standard metal seats is rated up to 427°C. The plug is offered with equal-percentage, quick-opening or linear characteristics, and flow is up through the seat ring.
Restricted-capacity and full-sized trims are interchangeable. For very low flows, Micro-Form and Micro-Flow plugs are available with port diameters from 4.8 to 19.1 mm. Port diameters go up to 101.6 mm (NPS 4), and 316 stainless steel packing-box parts, including the packing flange, studs and nuts, are standard.
This model is supplied to order and the price is on request. To size it, select the pressure class, body material and trim, and send Barmaan's engineers the process conditions (fluid, pressures, pressure drop, flow rates and temperature). Actuator and accessory data are given in their own bulletins and are not part of this bulletin. Every figure on this page comes from the official PESA bulletin (October 2021).
| Параметр | Значение |
|---|---|
| Manufacturer | Pishro Sanat Amal Co. LTD (PESA), Tehran, Iran |
| Device type | Single-port sliding-stem globe control valve, post-guided unbalanced plug, quick-change trim |
| Sizes (NPS) | 1/2, 3/4, 1, 1-1/2, 2, 3, 4 |
| End connections | Cast iron (NPS 1 to 4): CL125 FF or CL250 RF flanges per ASME B16.1; steel and stainless steel: CL150/300/600 RF or RTJ flanges per ASME B16.5 and RF flanges per EN 1092-1/B; screwed or socket-weld NPS 1/2 to 2 (ASME B16.11); butt-weld schedule 40/80 NPS 1 to 4 (ASME B16.25) |
| Pressure ratings | Cast iron: CL125B / CL250B per ASME B16.1; steel and stainless steel: CL150, 300, 600 per ASME B16.34 |
| Body and bonnet materials | Cast iron, WCC steel, CF8M (316 stainless), WC9 chrome moly — other materials on request |
| Seating and shutoff class | Metal-to-metal: Class IV standard, V and VI optional; PTFE composition: Class VI — per ANSI/FCI 70-2 and IEC 60534-4 |
| Flow characteristic and direction | Equal percentage, quick-opening or linear (with soft seat: equal percentage standard); flow up through the seat ring |
| Max Cv (equal percentage, full-sized trim) | NPS 1/2: 4.47 · 3/4: 9.00 · 1: 13.2 · 1-1/2: 28.1 · 2: 53.8 · 3: 114 · 4: 190 |
| Port diameters | 4.8 to 101.6 mm (Micro-Flow 4.8 and 6.4 mm; Micro-Form 6.4 to 19.1 mm) |
| Temperature capability | Trim with standard metal seats up to 427°C (800°F) |
| Stem packing and bonnet | Single PTFE V-ring standard; options: Graphite ULF and duplex; plain or extension bonnet; bellows-seal bonnet; 316 stainless steel packing-box parts standard |
| Stem diameters | 9.5, 12.7, 19.1 mm |
| Approximate weight | NPS 1/2 and 3/4: 9 kg · 1: 11 kg · 1-1/2: 18 kg · 2: 36 kg · 3: 54 kg · 4: 75 kg |
Модели-сёстры из этого семейства — информационные, не из склада.
Этот раздел доступен только на английском языке
| Код модели | Описание | Диапазон измерений |
|---|---|---|
| VP-201 | VP-201 — single-port globePost-guided unbalanced plug, NPS 1/2 to 4 | NPS 1/2–4 |
Все перечисленные модели могут поставляться с требуемой сертификацией, протоколом выходного сигнала и присоединением к процессу — свяжитесь с нами или запросите предложение для точного подбора кода модели.
Этот раздел доступен только на английском языке
Throttling or on-off control of liquids and gases

Chemical and hydrocarbon processing
Viscous and non-lubricating fluids
Very low-flow lines (Micro-Form / Micro-Flow plugs)
Отзывов пока нет
Будьте первым, кто оставит отзыв об этом продукте.
Этот раздел доступен только на английском языке
Liquids and gases in throttling or on-off control, especially chemical or hydrocarbon processing and non-lubricating, viscous or other hard-to-handle fluids. The bulletin does not list specific fluids; send your process conditions when enquiring.
NPS 1/2, 3/4, 1, 1-1/2, 2, 3 and 4. ASME flanges (cast iron CL125/CL250; steel and stainless steel CL150/300/600, RF or RTJ), RF flanges per EN 1092-1/B, screwed or socket-weld (NPS 1/2 to 2) and butt-weld (NPS 1 to 4).
Metal-to-metal seating is Class IV as standard with Class V and VI optional; metal-to-PTFE (PTFE composition) seating gives Class VI; all per ANSI/FCI 70-2 and IEC 60534-4.
For full-sized trim with equal-percentage characteristic at maximum travel: NPS 1/2: 4.47; 3/4: 9.00; 1: 13.2; 1-1/2: 28.1; 2: 53.8; 3: 114; 4: 190. Linear and quick-opening plugs normally give somewhat higher values.
Type of application, fluid and specific gravity, temperature, inlet pressure and pressure drop, flow rates (minimum/normal/maximum), shutoff class, body and trim material, end connection and pressure class, and stem diameter and bonnet type. Price and availability are given on enquiry.
Калибровка, испытания и поставка для этого оборудования