
PESA (Pishro Sanat)PESA VP-201 Sliding-Stem Globe Control Valve
Промышленная арматура

Balanced Plug, Cage Guided
PESA single-port, sliding-stem globe control valve with a balanced plug and cage guiding, in three versions: VP501 (globe), VP501A (angle) and VP501R (push-down-to-open). NPS 1 to 8 (DN 25 to 200) for liquids and gases. Supplied to order, price on request.
Цена
Нет в наличии — запросите предложение на поставкуОтправьте запрос, чтобы узнать цену.



Этот раздел доступен только на английском языке

Gas services with aerodynamic noise (Anti-Noise trim and…

Oil and gas production; special constructions for demanding…
Throttling or on-off control of liquids and gases in…
Liquid services prone to cavitation (with Anti-Cavitation…
Этот раздел доступен только на английском языке
PESA single-port, sliding-stem globe control valve with a balanced plug and cage guiding, in three versions: VP501 (globe), VP501A (angle) and VP501R (push-down-to-open). NPS 1 to 8 (DN 25 to 200) for liquids and gases. Supplied to order, price on request.
The VP501 is a PESA control valve made by Pishro Sanat Amal Co. LTD (Tehran, Iran): a single-port, sliding-stem globe control valve with a balanced plug and cage guiding, used for throttling or on-off control of a wide variety of liquids and gases. Metal-to-PTFE seating for stringent shutoff is standard in every valve except those with Anti-Cavitation cages, and metal-to-metal seating is available for higher temperatures.
The standard PTFE seating is limited to 232°C. With PEEK anti-extrusion rings combined with a spring-loaded PTFE seal, the limit is extended to 316°C in non-oxidizing service and 260°C in oxidizing service. The standard stem packing is a single PTFE V-ring; Graphite ULF and duplex packing are optional.
To help prevent cavitation damage, a standard-travel one-stage Anti-Cavitation cage and a long-travel two-stage Anti-Cavitation cage are available in NPS 1 through 8; Anti-Noise trims and cages attenuate aerodynamic noise in gas service. The standard cage comes in three flow characteristics: quick-opening, linear or equal percentage. For inspection the body can stay in the pipeline while the trim parts are removed.
This model is supplied to order and the price is on request. To size it, select the pressure class, body material and trim, send Barmaan's engineers the process conditions (fluid, pressures, pressure drop, flow rates and temperature). Actuator and accessory data are given in their own bulletins and are not part of this datasheet. Every figure on this page comes from the official PESA datasheet (August 2021).
| Параметр | Значение |
|---|---|
| Manufacturer | Pishro Sanat Amal Co. LTD (PESA), Tehran, Iran |
| Device type | Single-port sliding-stem globe control valve, balanced plug, cage guided |
| Versions | VP501 globe (push-down-to-close) · VP501A angle · VP501R (push-down-to-open) |
| Sizes (NPS) | VP501: 1, 1-1/2, 2, 2-1/2, 3, 4, 6, 8 · VP501A: 1, 2, 3, 4, 6 · VP501R: 1, 1-1/2, 2, 2-1/2, 3, 4 |
| Sizes (DN, EN) | VP501: 25, 40, 50, 65, 80, 100, 150, 200 · VP501A: 25, 50, 80, 100, 150 · VP501R: 25, 40, 50, 65, 80, 100 |
| End connections | Raised-face flanges per EN 1092-1/B (PN16, PN25, PN40, PN63, PN100); ASME: cast iron CL125 FF / CL250 RF, steel CL150, 300, 600, 900 (RF or RTJ); screwed, butt-weld and socket-weld (consistent with CL600) |
| Body and bonnet materials | Cast iron, WCC, LCC, WC9, CF8M (316) — other materials on request |
| Seating and shutoff class | PTFE seating: Class V (air test), VI optional; metal seating: Class IV standard, V and VI optional — per ANSI/FCI 70-2 and IEC 60534-4 |
| Flow characteristic | Standard cage: quick-opening, linear or equal percentage; anti-noise and anti-cavitation cages: linear |
| Max Cv (equal percentage, full-sized trim) | VP501 / VP501R — NPS 1: 17.2 · 1-1/2: 35.8 · 2: 59.7 · 2-1/2: 99.4 · 3: 136 · 4: 224 · VP501 only — 6: 394 · 8: 567 (51 mm travel) / 819 (76 mm travel) · VP501A (with liner) — 1: 18.5 · 2: 48.1 · 3: 149 · 4: 152 · 6: 336 |
| Temperature limit | Standard PTFE up to 232°C; with PEEK anti-extrusion rings up to 316°C (non-oxidizing) and 260°C (oxidizing) |
| Stem packing | Single PTFE V-ring standard; options: Graphite ULF, duplex, live-loaded packing; bellows seal 316L or N04400 |
| Stem diameters | 9.5, 12.7, 19.1, 25.4, 31.8 mm |
| Approximate weight | NPS 1: 15 kg · 1-1/2: 22 · 2: 42 · 2-1/2: 48 · 3: 60 · 4: 83 · 6: 166 · 8: 418 kg |
Модели-сёстры из этого семейства — информационные, не из склада.
Этот раздел доступен только на английском языке
| Код модели | Описание | Диапазон измерений |
|---|---|---|
| VP501 | VP501 — globePush-down-to-close; NPS 1 to 8 | NPS 1–8 / DN 25–200 |
| VP501A | VP501A — angleFor easier piping or self-draining; NPS 1 to 6 | NPS 1–6 / DN 25–150 |
| VP501R | VP501R — push-down-to-openBody interior accessible without removing the bonnet; NPS 1 to 4 | NPS 1–4 / DN 25–100 |
Все перечисленные модели могут поставляться с требуемой сертификацией, протоколом выходного сигнала и присоединением к процессу — свяжитесь с нами или запросите предложение для точного подбора кода модели.
Этот раздел доступен только на английском языке
Throttling or on-off control of liquids and gases in…
Liquid services prone to cavitation (with Anti-Cavitation…

Gas services with aerodynamic noise (Anti-Noise trim and…
High-temperature service up to 316°C with PEEK rings…

Oil and gas production; special constructions for demanding…
Отзывов пока нет
Будьте первым, кто оставит отзыв об этом продукте.
Этот раздел доступен только на английском языке
All three are single-port with a balanced plug and cage guiding. The VP501 is a globe valve that closes on a push-down action; the VP501A is the angle version for easier piping or self-draining; the VP501R is like the VP501 but opens on the push-down action and gives access to the body interior without removing the bonnet or actuator.
VP501: NPS 1, 1-1/2, 2, 2-1/2, 3, 4, 6, 8 (DN 25 to 200); VP501A: NPS 1, 2, 3, 4, 6; VP501R: NPS 1, 1-1/2, 2, 2-1/2, 3, 4. EN 1092-1/B flanges in PN16 to PN100, ASME flanges (cast iron CL125/250, steel CL150 to 900), screwed and welding ends.
Standard PTFE seating is rated to 232°C. With PEEK anti-extrusion rings and a spring-loaded PTFE seal the limit is 316°C in non-oxidizing and 260°C in oxidizing service. The final limit for each body and trim combination is in the datasheet tables and charts and must not exceed the pressure-class limit.
A one-stage Anti-Cavitation cage with standard travel and a two-stage cage with long travel in NPS 1 to 8, plus Anti-Noise trim and cages for gas (all linear characteristic). Anti-Noise cages come in levels A3, B3, C3 and D3, each with its own maximum dP/P1 ratio.
Type of application (throttling or on-off), fluid and its specific gravity, fluid temperature, inlet pressures (minimum/normal/maximum), pressure drops, flow rates (minimum/normal/maximum), maximum permissible noise, shutoff class, stem diameter and bonnet type, and line size and schedule. Price and availability are given on enquiry.
Калибровка, испытания и поставка для этого оборудования