
Endress+HauserProline Promag W 400
流量计
HART, PROFIBUS DP, EtherNet/IP, Modbus RS485; 0/4–20 mA HART…

The Promag W 800 is a battery-powered electromagnetic flowmeter with EN ISO 12944 corrosion protection and an intelligent energy-efficient mode, made for direct underground installation or permanent underwater use.




本节目前仅提供英文版本

Drinking-water distribution networks and utilities.

Drinking water, utility water and industrial or municipal…

Water custody-transfer points approved to MI-001 / OIML R49.
Remote or hard-to-reach measuring points where mains power…
本节目前仅提供英文版本
The Promag W 800 is a battery-powered electromagnetic flowmeter with EN ISO 12944 corrosion protection and an intelligent energy-efficient mode, made for direct underground installation or permanent underwater use.
Endress+Hauser Proline Promag W 800 Electromagnetic Flowmeter: The Promag W 800 is a battery-powered electromagnetic flowmeter with EN ISO 12944 corrosion protection and an intelligent energy-efficient mode, made for direct underground installation or permanent underwater use.
An electromagnetic flowmeter applies Faraday's law: a magnetic field is generated across the pipe, and an electrically conductive liquid moving through it induces a voltage proportional to the flow velocity, picked up by electrodes. The measuring tube has no constriction and no moving parts, so there is no pressure loss from the sensor and virtually no wear. According to the manufacturer, the bidirectional principle is virtually independent of pressure, density, temperature and viscosity.
Battery lifetime of up to 15 years, adjustable measuring intervals, encrypted cellular data transmission (LTE Cat M1/NB1/NB2, GPRS/EGPRS) and commissioning via Bluetooth with the SmartBlue app. Key figures from the official data: nominal diameter DN 25–600; maximum measured error ±0.5 % o.r. ± 2 mm/s; measuring range 9 dm³/min–22 500 m³/h; medium temperature –20…+70 °C; process pressure up to PN 40 / Class 300 / 20K.
Barmaan supplies this model by order code on inquiry; there is no list price on the page. Send the nominal diameter, medium, process connection and the required outputs, and we will confirm the configuration against the official Technical Information.
| 参数项 | 参数值 |
|---|---|
| General | |
| Measuring principle | Electromagnetic (Faraday), battery-powered |
| Nominal diameter range | DN 25 to 600 (1 to 24") |
| Degree of protection | IP66/67 (type 4X) and IP68 (type 6P) |
| Approvals and certificates | Drinking water: ACS, KTW-BWGL, NSF 61, WRAS BS 6920; custody transfer MI-001; CRN, PED; CE, EAC, UKCA |
| Official document | Technical Information TI01523D |
| Performance & accuracy | |
| Maximum measured error | Volume flow: ±0.5 % o.r. ± 2 mm/s (±0.5 % o.r. ± 0.08 in/s) |
| Measuring range | 9 dm³/min to 22 500 m³/h (2.5 to 100 000 gal/min) |
| Process conditions | |
| Medium temperature range | Hard rubber: 0 to +70 °C; polyurethane: –20 to +50 °C; PTFE: –20 to +70 °C |
| Maximum process pressure | PN 40, Class 300, 20K |
| Wetted materials | Liner: polyurethane, PTFE, hard rubber; electrodes: 1.4435 (316L), Alloy C22, 2.4602 (UNS N06022) |
| Electrical & communication | |
| Digital communication | LTE Cat M1, Cat NB1, Cat NB2, GPRS, EGPRS; Modbus RS485; 3x pulse/switch output (passive) |
| Power supply | Internal: batteries DC 3.6 V (up to 15 years); external: AC 85 to 265 V / DC 19 to 30 V |
本节目前仅提供英文版本

Drinking-water distribution networks and utilities.
Remote or hard-to-reach measuring points where mains power…

Drinking water, utility water and industrial or municipal…

Water custody-transfer points approved to MI-001 / OIML R49.
暂无评论
成为第一个评论此产品的人。
本节目前仅提供英文版本
Electrically conductive liquids, e.g. water, wastewater and many process liquids. It cannot measure non-conductive liquids such as pure hydrocarbons or gases.
No. The measuring tube has no cross-section constriction, so the sensor itself causes no pressure loss, and it has no moving parts to maintain.
The approvals differ per model and liner; the model-specific drinking-water or hygienic approvals the manufacturer lists are in the specification table and the Technical Information.
The manufacturer states a battery lifetime of up to 15 years, depending on the measuring interval and data-transmission settings; external supply (AC 85 to 265 V / DC 19 to 30 V) is also possible.
The official Endress+Hauser Technical Information TI01523D is attached in the downloads section of this page, so you have the full specification and ordering information.
Pricing depends on nominal diameter, process connection, materials, approvals and the transmitter configuration (order code). Send us your requirements and we quote it on request.

流量计
HART, PROFIBUS DP, EtherNet/IP, Modbus RS485; 0/4–20 mA HART…

流量计
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

流量计
HART, Modbus RS485, IO-Link; 4–20 mA; pulse/frequency/switch…

流量计
4–20 mA HART + Pulse/Frequency (I-OUT, f-OUT)
1天内发货
起 US$4,000

流量计
M-Bus, wireless M-Bus, Modbus, BACnet, LoRa … (2 module slots)

流量计
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

流量计

流量计
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

流量计
面向此类设备的校准、检测与供应服务