
PESA (Pishro Sanat)PESA VA-10 / VA-10R Pneumatic Piston Actuator
Valve Actuators
价格面议
1 / 3PESA (Pishro Sanat Amal) spring-opposed linear pneumatic diaphragm actuator for sliding-stem control valves: VA31 direct-acting and VA32 reverse-acting in sizes 30 to 70, on-off or throttling service, with cold-service capability to −50 °C. Quoted on request only.

本节目前仅提供英文版本
On-off operation of automatic sliding-stem control valves
Throttling control with a 3–15 psig (0.2–1.0 bar) or 6–30…
Cold-service applications to −50 °C (with a positioner…
Valves needing fail-open (VA31) or fail-closed (VA32)…
本节目前仅提供英文版本
PESA (Pishro Sanat Amal) spring-opposed linear pneumatic diaphragm actuator for sliding-stem control valves: VA31 direct-acting and VA32 reverse-acting in sizes 30 to 70, on-off or throttling service, with cold-service capability to −50 °C. Quoted on request only.
The VA31 and VA32 are spring-opposed pneumatic diaphragm actuators from Pishro Sanat Amal (brand PESA, Tehran) that position the valve plug in response to a varying controller or positioner pneumatic signal applied to the diaphragm. The zero setting is determined by the compression of the actuator spring, and the span by both the spring rate and the number of springs. The VA31 is direct-acting and the VA32 is reverse-acting; both are designed for dependable on-off or throttling operation of automatic control valves.
Direction of action. On the VA31, pressure on the diaphragm drives the stem down and the stem rises when air is lost (fail-open for push-down-to-close valves). On the VA32, pressure drives the stem up and it lowers on loss of air (fail-closed for push-down-to-close valves).
Sizes. The bulletin table lists sizes 30, 40, 50, 60 and 70 with effective diaphragm area from 297 to 1,419 cm², maximum travel of 19 to 76 mm and maximum allowable force from 10,231 to 39,142 N. Standard signal ranges are 0.2–1.0 bar (3–15 psig) or 0.4–2.0 bar (6–30 psig); the VA3x-4 type covers 0.2–1.9 bar (3–27 psig).
Construction. A molded diaphragm in a deep casing gives good linearity between loading pressure and travel, a shallow casing on the pressure side reduces volume for faster response, and thick-walled cast iron and steel construction gives long service life and protection if over-pressurized. A split-block stem connection transfers motion solidly with easy mounting, and the absence of linkages avoids lost motion.
Cold service. Enhanced specifications for all sizes allow performance to −50 °C; a positioner is recommended below −40 °C. Standard (nitrile) operating temperature is −40 to +82 °C, and −40 to +149 °C with a silicone diaphragm.
Buying note. This page is written only from the manufacturer's bulletin and no certification or standard is claimed. Price and availability are provided on enquiry; please send the service, signal range, supply pressure, valve body type and size, travel and force required.
| 参数项 | 参数值 |
|---|---|
| General | |
| Manufacturer | Pishro Sanat Amal Co. LTD (PESA), Tehran, Iran — pesa.ir |
| Models and sizes | VA31 (direct-acting) and VA32 (reverse-acting); sizes 30, 40, 50, 60, 70; VA31-4 / VA32-4 types |
| Type | Spring-opposed linear pneumatic diaphragm actuator for sliding-stem control valves |
| Performance | |
| Action | VA31: pressure → stem down, air failure → stem up (fail-open for push-down-to-close). VA32: pressure → stem up, air failure → stem down (fail-closed for push-down-to-close) |
| Signal range | Standard 0.2–1.0 bar (3–15 psig) or 0.4–2.0 bar (6–30 psig); VA3x-4: 0.2–1.9 bar (3–27 psig) |
| Effective area | 30: 297 cm² · 40: 445 cm² · 50: 677 cm² · 60: 1006 cm² · 70: 1419 cm² |
| Travel | Maximum travel (mm): 30: 19 · 40: 38 · 50: 51 · 60: 51 · 70: 76 |
| Maximum allowable force (N) | 30: 10,231 · 40: 12,010 · 50: 25,131 · 60: 30,246 · 70: 39,142 |
| Mechanical | |
| Stem and yoke boss diameter | Yoke boss / stem diameter (mm): 30: 54 / 9.5 · 40: 71 / 12.7 · 50: 71 / 90 / 19.1 · 60: 71 / 90 / 19.1 · 70: 90 / 19.1 |
| Weight | kg (VA31 / VA32): 30: 16 / 15 · 40: 23 / 23 · 50: 42 / 43 · 60: 53 / 55 · 70: 107 / 115 |
| Air connection | 1/4 NPT internal signal connection (sizes 30 to 60 per the bulletin) |
| Indicator | Stainless steel disc/pointer with a graduated scale |
| Operating conditions | |
| Operating temperature | Standard (nitrile): −40 to +82 °C; silicone diaphragm: −40 to +149 °C; cold service to −50 °C (a positioner is recommended below −40 °C) |
| Materials & construction | |
| Main materials | Diaphragm: nitrile/nylon or silicone/polyester; diaphragm plate: aluminum (30–60) or cast iron (70); spring, stem, seat and adjuster: steel; O-ring nitrile; seal bushing brass; yoke cast iron. Cold version: LCC steel yoke, silicone diaphragm, ethylene-propylene O-ring, stainless DIN 8.8 bolting |
| Options & accessories | |
| Options | Larger signal connection, plastic yoke coating, top/side handwheel (sizes 40–70; size 30 top only), travel stops; accessories: transducer, positioner, transmitter, air relay, booster, switch, solenoid |
同系列的其他型号 — 仅供参考,非库存产品。
本节目前仅提供英文版本
| 型号代码 | 说明 | 测量范围 |
|---|---|---|
| VA31/VA32-30 | Size 30Effective area 297 cm²; max travel 19 mm; max force 10,231 N; weight 16 / 15 kg (VA31 / VA32) | 297 cm² |
| VA31/VA32-40 | Size 40Effective area 445 cm²; max travel 38 mm; max force 12,010 N; weight 23 / 23 kg (VA31 / VA32) | 445 cm² |
| VA31/VA32-50 | Size 50Effective area 677 cm²; max travel 51 mm; max force 25,131 N; weight 42 / 43 kg (VA31 / VA32) | 677 cm² |
| VA31/VA32-60 | Size 60Effective area 1006 cm²; max travel 51 mm; max force 30,246 N; weight 53 / 55 kg (VA31 / VA32) | 1006 cm² |
| VA31/VA32-70 | Size 70Effective area 1419 cm²; max travel 76 mm; max force 39,142 N; weight 107 / 115 kg (VA31 / VA32) | 1419 cm² |
所列全部型号均可按您所需的认证、输出协议及过程连接方式供货 — 如需确定具体型号代码,请联系我们或提交询价。
本节目前仅提供英文版本
On-off operation of automatic sliding-stem control valves
Throttling control with a 3–15 psig (0.2–1.0 bar) or 6–30…
Cold-service applications to −50 °C (with a positioner…
Valves needing fail-open (VA31) or fail-closed (VA32)…
暂无评论
成为第一个评论此产品的人。
本节目前仅提供英文版本
The VA31 is direct-acting: pressure on the diaphragm drives the stem down and it rises on loss of air. The VA32 is reverse-acting: pressure drives the stem up and it lowers on loss of air. On push-down-to-close valves the first gives fail-open and the second fail-closed.
Sizes 30 to 70 with effective diaphragm area of 297 to 1,419 cm², maximum travel of 19 to 76 mm and maximum allowable force of 10,231 to 39,142 N per the bulletin table.
The bulletin states enhanced specifications on all sizes that allow performance to −50 °C, with a positioner recommended below −40 °C. For this version it lists an LCC steel yoke, silicone diaphragm and ethylene-propylene O-rings.
The bulletin cites no product certification or standard and we claim none; it only mentions DIN 8.8 stainless bolting and an LCC steel yoke in the cold version. Further documents can be requested from the manufacturer on enquiry.
The service (on-off or throttling), signal range, supply pressure, valve body type and size, travel, force required, stroke time, vibration and ambient temperature; the price is quoted on request.