
PESA (Pishro Sanat)PESA VA-10 / VA-10R Pneumatic Piston Actuator
Valve Actuators
价格面议

Self-contained electro-hydraulic linear actuator with spring return and an internal control module, made by PESA (Pishro Sanat Amal) for linear-stem valves: two-position, ESD or modulating duty, 11 to 61 kN thrust and up to 110 mm stroke. Quoted on request only.

本节目前仅提供英文版本
Two-position (open/close) linear-stem valves that need a…
Emergency shutdown (ESD) and partial-stroke testing duty on…
Modulating control of linear-stem control valves with a…
Locations with electrical power but no compressed-air…
本节目前仅提供英文版本
Self-contained electro-hydraulic linear actuator with spring return and an internal control module, made by PESA (Pishro Sanat Amal) for linear-stem valves: two-position, ESD or modulating duty, 11 to 61 kN thrust and up to 110 mm stroke. Quoted on request only.
The VA-40L is a smart electro-hydraulic, spring-return linear actuator from Pishro Sanat Amal (brand PESA, Tehran) for any valve with a linear (sliding-stem) drive shaft, in two-position, emergency-shutdown (ESD) or modulating service. A low-pressure electro-hydraulic control module and a linear spring-return cylinder are combined in one self-contained unit: the simplicity of electrical operation with the precision of hydraulics and the reliability of spring-powered fail-safe action.
Safe action on loss of power or signal. The return spring drives the valve to its safe position. Depending on the order code the actuator fails in the direction of the spring (open or closed) or stays in its last position, and it can be ordered with the spring returning the shaft to extend or to retract. Spring-return, single, dual and ESD combination options are listed in the datasheet order-code tables.
Control and commissioning. Command can be digital (open, close, maintain, ESD, partial stroke) or analogue modulating with a 4–20 mA or 0–10 VDC input; the 4–20 or 20–4 mA output is powered from an isolated internal 24 VDC supply or an external one. Setting is non-intrusive with a hand-held infrared tool, an LCD shows position, internal pressure and diagnostics screens, and a lockable Local/Stop/Remote selector with an Open/Close switch is fitted. Alarm relays and two latching relays for the open and closed limits are available.
Sizes. Seven models from VA-40L-200/110 to VA-40L-450/110, maximum stroke 110 mm, maximum working pressure 30 barg and thrust from 11 to 61 kN (per the datasheet description). Supply is 1-phase 115 or 230 VAC or 3-phase 380 to 480 VAC. A hydraulic hand pump is optional on all sizes.
Buying note. This page is written only from the manufacturer's datasheet. Price, lead time and further documentation (including any certificate) are provided on enquiry; please send the valve stem diameter and stroke, required thrust, available supply and fail direction.
| 参数项 | 参数值 |
|---|---|
| General | |
| Manufacturer | Pishro Sanat Amal Co. LTD (PESA), Tehran, Iran — pesa.ir |
| Models and sizes | VA-40L-200/110, 250/110, 280/110, 320/110, 350/110, 400/110, 450/110 (spring to extend) |
| Type | Smart electro-hydraulic linear actuator, spring-return (failsafe), for linear-stem valves |
| Performance | |
| Maximum stroke | 110 mm (other options: consult the factory) |
| Thrust, hydraulic stroke (kN, start → end) | VA-40L-200/110: 15.42 → 8.52 · VA-40L-250/110: 23.88 → 13.14 · VA-40L-280/110: 30.17 → 16.62 · VA-40L-320/110: 39.47 → 21.57 · VA-40L-350/110: 47.9 → 26.68 · VA-40L-400/110: 62.22 → 34.09 · VA-40L-450/110: 78.75 → 42.95 |
| Thrust, spring return (kN, start → end) | VA-40L-200/110: 17.82 → 11.88 · VA-40L-250/110: 27.71 → 18.48 · VA-40L-280/110: 34.98 → 23.32 · VA-40L-320/110: 46.2 → 30.8 · VA-40L-350/110: 54.78 → 36.52 · VA-40L-400/110: 72.6 → 48.4 · VA-40L-450/110: 92.4 → 61.6 |
| Stroke speed (mm/s): hydraulic · spring return A / B / C | VA-40L-200/110: 4.2 · 4.2 / 5.8 / 14 · VA-40L-250/110: 2.6 · 2.6 / 3.6 / 8.8 · VA-40L-280/110: 2.0 · 2.0 / 3.0 / 7.0 · VA-40L-320/110: 1.6 · 1.6 / 2.2 / 5.4 · VA-40L-350/110: 1.3 · 1.3 / 1.8 / 4.4 · VA-40L-400/110: 1.0 · 1.0 / 1.4 / 3.4 · VA-40L-450/110: 0.8 · 0.8 / 1.2 / 2.7 |
| Pressure | Maximum working pressure 30 barg |
| Failure mode | Fail-safe in the direction of the spring, or fail in last position (chosen by order code) |
| Action | Actuator shaft extends or retracts on spring return |
| Manual override | Hydraulic hand pump (optional, all sizes) |
| Electrical & control | |
| Electrical supply | 1-phase 115 or 230 VAC; 3-phase 380 to 480 VAC; voltage tolerance ±10 %, frequency 50/60 Hz ±5 % |
| Resolution and repeatability | Resolution < 0.8 % of full scale; repeatability < 0.8 % (datasheet specification section) |
| Control signal | Digital (open, close, maintain, ESD, partial stroke) or analogue modulating 4–20 mA / 0–10 VDC |
| Output | 4–20 or 20–4 mA; isolated internal 24 VDC supply or external customer supply |
| Function settings | Deadband and hysteresis adjustable 0–99 %, partial stroke 0–99 %, interrupt timer (ON/OFF pulse 100 ms to 99 s) and ESD action |
| Relays and limit switches | Alarm relay and two latching relays for open/closed limits, volt-free contacts rated 5 mA to 5 A at 30 VDC; optional limit switches: two SPDT volt-free, 5 A minimum at 230 VAC |
| Display and local controls | LCD (position, internal pressure, diagnostics) and LEDs; lockable Local/Stop/Remote selector and Open/Close switch; setting with a hand-held infrared tool |
| Operating conditions | |
| Hydraulic fluid and temperature | Mineral −15 to +60 °C; food grade −10 to +60 °C; silicone −30 to +60 °C; silicone with low-temperature seals −40 to +60 °C |
| Mechanical | |
| Mounting | Valve stem vertical (up/down) or horizontal; with or without mounting kit |
| Cable entries | M25×1.5P · adapter M20×1.5P · 1/2" NPT · 3/4" NPT · 1" NPT |
| Enclosure protection | Code 0: Watertight IP65; code 1: Explosion Proof and IP65; optional IP68 (7 m / 72 h). The datasheet cites no standard or certifying body. |
| Weight | 220 kg (200/110), 250 kg (250/110), 270 kg (280/110), 290 kg (320/110); 350, 400 and 450 models on request (OR) |
| Options & accessories | |
| Order code structure | Example: VA-40L-200/110-0 0 S2-1 0-0 0 A A; selection tables: size, failure mode, return speed (A/B/C/D), electrical supply (S1/S2/S3), control (digital/analogue), certification/protection, cable entry, fluid/temperature, mounting (A–F) and accessories (hand pump, IP68, hardwired ESD, Viton seals) |
同系列的其他型号 — 仅供参考,非库存产品。
本节目前仅提供英文版本
| 型号代码 | 说明 | 测量范围 |
|---|---|---|
| VA-40L-200/110 | VA-40L-200/110Max stroke 110 mm; spring-return thrust 11.88–17.82 kN; hydraulic thrust 8.52–15.42 kN | 11.88–17.82 kN |
| VA-40L-250/110 | VA-40L-250/110Max stroke 110 mm; spring-return thrust 18.48–27.71 kN; hydraulic thrust 13.14–23.88 kN | 18.48–27.71 kN |
| VA-40L-280/110 | VA-40L-280/110Max stroke 110 mm; spring-return thrust 23.32–34.98 kN; hydraulic thrust 16.62–30.17 kN | 23.32–34.98 kN |
| VA-40L-320/110 | VA-40L-320/110Max stroke 110 mm; spring-return thrust 30.8–46.2 kN; hydraulic thrust 21.57–39.47 kN | 30.8–46.2 kN |
| VA-40L-350/110 | VA-40L-350/110Max stroke 110 mm; spring-return thrust 36.52–54.78 kN; hydraulic thrust 26.68–47.9 kN | 36.52–54.78 kN |
| VA-40L-400/110 | VA-40L-400/110Max stroke 110 mm; spring-return thrust 48.4–72.6 kN; hydraulic thrust 34.09–62.22 kN | 48.4–72.6 kN |
| VA-40L-450/110 | VA-40L-450/110Max stroke 110 mm; spring-return thrust 61.6–92.4 kN; hydraulic thrust 42.95–78.75 kN | 61.6–92.4 kN |
所列全部型号均可按您所需的认证、输出协议及过程连接方式供货 — 如需确定具体型号代码,请联系我们或提交询价。
本节目前仅提供英文版本
Two-position (open/close) linear-stem valves that need a…
Emergency shutdown (ESD) and partial-stroke testing duty on…
Modulating control of linear-stem control valves with a…
Locations with electrical power but no compressed-air…
暂无评论
成为第一个评论此产品的人。
本节目前仅提供英文版本
Per the datasheet it suits all valve types with a linear drive shaft (sliding-stem), with the valve stem vertical (up or down) or horizontal, with or without a mounting kit. Exact mechanical fit to your valve (bracket, stem, travel) is checked once you send the valve details.
The return spring drives the valve to its safe position. The failure mode is set by the order code: fail-safe in the direction of the spring (open or closed) or last position; the spring return direction can be chosen as extend or retract.
Digital input (open, close, maintain, ESD, partial stroke) or analogue modulating 4–20 mA or 0–10 VDC. The feedback output is 4–20 or 20–4 mA, from an isolated internal 24 VDC supply or an external one.
The datasheet names an «Explosion Proof and IP65» version (code 1 in the order code) but cites no standard, certificate number or certifying body, so we do not claim any specific certification. For installation in a hazardous area, ask us for the certificate documents and we will request them from the manufacturer.
No price is shown; it is quoted on request. Please send the model (size), fail direction, available supply, signal type, stroke and valve stem diameter, and any order-code options you need.