Skip to content
Barmaan Trading Company
Valve Actuators

PESA VA-40L Smart Electro-Hydraulic Linear Valve Actuator

Verified product
Brand:
PESA (Pishro Sanat)
Product code:
100089

Self-contained electro-hydraulic linear actuator with spring return and an internal control module, made by PESA (Pishro Sanat Amal) for linear-stem valves: two-position, ESD or modulating duty, 11 to 61 kN thrust and up to 110 mm stroke. Quoted on request only.

  • Control signalDigital (open, close, maintain, ESD…
  • Output4–20 or 20–4 mA; isolated internal 24…
  • Enclosure protectionCode 0: Watertight IP65; code 1…
Download datasheet

Overview

Product Gallery

Key Features

PESA (Pishro Sanat)P(S
  • Self-contained: low-pressure electro-hydraulic control module and…
  • Spring failsafe: open, close or lock in last position on loss of…
  • Single-phase and three-phase supply options at 50/60 Hz
  • Non-intrusive commissioning and configuration with a hand-held…
  • LCD for position, internal pressure and fault diagnostics; lockable…
  • Modulating control with 4–20 mA input/output; alarm and open/close…
  • Double-sealed control module with separate terminal and cable gland…
  • Spring-return, single, dual or ESD combination valve options…

Typical Applications

See all applications
  • Two-position (open/close) linear-stem valves that need a…

  • Emergency shutdown (ESD) and partial-stroke testing duty on…

  • Modulating control of linear-stem control valves with a…

  • Locations with electrical power but no compressed-air…

Product Overview

Self-contained electro-hydraulic linear actuator with spring return and an internal control module, made by PESA (Pishro Sanat Amal) for linear-stem valves: two-position, ESD or modulating duty, 11 to 61 kN thrust and up to 110 mm stroke. Quoted on request only.

The VA-40L is a smart electro-hydraulic, spring-return linear actuator from Pishro Sanat Amal (brand PESA, Tehran) for any valve with a linear (sliding-stem) drive shaft, in two-position, emergency-shutdown (ESD) or modulating service. A low-pressure electro-hydraulic control module and a linear spring-return cylinder are combined in one self-contained unit: the simplicity of electrical operation with the precision of hydraulics and the reliability of spring-powered fail-safe action.

Safe action on loss of power or signal. The return spring drives the valve to its safe position. Depending on the order code the actuator fails in the direction of the spring (open or closed) or stays in its last position, and it can be ordered with the spring returning the shaft to extend or to retract. Spring-return, single, dual and ESD combination options are listed in the datasheet order-code tables.

Control and commissioning. Command can be digital (open, close, maintain, ESD, partial stroke) or analogue modulating with a 4–20 mA or 0–10 VDC input; the 4–20 or 20–4 mA output is powered from an isolated internal 24 VDC supply or an external one. Setting is non-intrusive with a hand-held infrared tool, an LCD shows position, internal pressure and diagnostics screens, and a lockable Local/Stop/Remote selector with an Open/Close switch is fitted. Alarm relays and two latching relays for the open and closed limits are available.

Sizes. Seven models from VA-40L-200/110 to VA-40L-450/110, maximum stroke 110 mm, maximum working pressure 30 barg and thrust from 11 to 61 kN (per the datasheet description). Supply is 1-phase 115 or 230 VAC or 3-phase 380 to 480 VAC. A hydraulic hand pump is optional on all sizes.

Buying note. This page is written only from the manufacturer's datasheet. Price, lead time and further documentation (including any certificate) are provided on enquiry; please send the valve stem diameter and stroke, required thrust, available supply and fail direction.

Technical Specifications

AttributeValue
General
ManufacturerPishro Sanat Amal Co. LTD (PESA), Tehran, Iran — pesa.ir
Models and sizesVA-40L-200/110, 250/110, 280/110, 320/110, 350/110, 400/110, 450/110 (spring to extend)
TypeSmart electro-hydraulic linear actuator, spring-return (failsafe), for linear-stem valves
Performance
Maximum stroke110 mm (other options: consult the factory)
Thrust, hydraulic stroke (kN, start → end)VA-40L-200/110: 15.42 → 8.52 · VA-40L-250/110: 23.88 → 13.14 · VA-40L-280/110: 30.17 → 16.62 · VA-40L-320/110: 39.47 → 21.57 · VA-40L-350/110: 47.9 → 26.68 · VA-40L-400/110: 62.22 → 34.09 · VA-40L-450/110: 78.75 → 42.95
Thrust, spring return (kN, start → end)VA-40L-200/110: 17.82 → 11.88 · VA-40L-250/110: 27.71 → 18.48 · VA-40L-280/110: 34.98 → 23.32 · VA-40L-320/110: 46.2 → 30.8 · VA-40L-350/110: 54.78 → 36.52 · VA-40L-400/110: 72.6 → 48.4 · VA-40L-450/110: 92.4 → 61.6
Stroke speed (mm/s): hydraulic · spring return A / B / CVA-40L-200/110: 4.2 · 4.2 / 5.8 / 14 · VA-40L-250/110: 2.6 · 2.6 / 3.6 / 8.8 · VA-40L-280/110: 2.0 · 2.0 / 3.0 / 7.0 · VA-40L-320/110: 1.6 · 1.6 / 2.2 / 5.4 · VA-40L-350/110: 1.3 · 1.3 / 1.8 / 4.4 · VA-40L-400/110: 1.0 · 1.0 / 1.4 / 3.4 · VA-40L-450/110: 0.8 · 0.8 / 1.2 / 2.7
PressureMaximum working pressure 30 barg
Failure modeFail-safe in the direction of the spring, or fail in last position (chosen by order code)
ActionActuator shaft extends or retracts on spring return
Manual overrideHydraulic hand pump (optional, all sizes)
Electrical & control
Electrical supply1-phase 115 or 230 VAC; 3-phase 380 to 480 VAC; voltage tolerance ±10 %, frequency 50/60 Hz ±5 %
Resolution and repeatabilityResolution < 0.8 % of full scale; repeatability < 0.8 % (datasheet specification section)
Control signalDigital (open, close, maintain, ESD, partial stroke) or analogue modulating 4–20 mA / 0–10 VDC
Output4–20 or 20–4 mA; isolated internal 24 VDC supply or external customer supply
Function settingsDeadband and hysteresis adjustable 0–99 %, partial stroke 0–99 %, interrupt timer (ON/OFF pulse 100 ms to 99 s) and ESD action
Relays and limit switchesAlarm relay and two latching relays for open/closed limits, volt-free contacts rated 5 mA to 5 A at 30 VDC; optional limit switches: two SPDT volt-free, 5 A minimum at 230 VAC
Display and local controlsLCD (position, internal pressure, diagnostics) and LEDs; lockable Local/Stop/Remote selector and Open/Close switch; setting with a hand-held infrared tool
Operating conditions
Hydraulic fluid and temperatureMineral −15 to +60 °C; food grade −10 to +60 °C; silicone −30 to +60 °C; silicone with low-temperature seals −40 to +60 °C
Mechanical
MountingValve stem vertical (up/down) or horizontal; with or without mounting kit
Cable entriesM25×1.5P · adapter M20×1.5P · 1/2" NPT · 3/4" NPT · 1" NPT
Enclosure protectionCode 0: Watertight IP65; code 1: Explosion Proof and IP65; optional IP68 (7 m / 72 h). The datasheet cites no standard or certifying body.
Weight220 kg (200/110), 250 kg (250/110), 270 kg (280/110), 290 kg (320/110); 350, 400 and 450 models on request (OR)
Options & accessories
Order code structureExample: VA-40L-200/110-0 0 S2-1 0-0 0 A A; selection tables: size, failure mode, return speed (A/B/C/D), electrical supply (S1/S2/S3), control (digital/analogue), certification/protection, cable entry, fluid/temperature, mounting (A–F) and accessories (hand pump, IP68, hardwired ESD, Viton seals)
View full specifications (PDF)

Orderable Models

Sister models of this family — informational, not stock.

Model codeDescriptionMeasuring range
VA-40L-200/110VA-40L-200/110Max stroke 110 mm; spring-return thrust 11.88–17.82 kN; hydraulic thrust 8.52–15.42 kN11.88–17.82 kN
VA-40L-250/110VA-40L-250/110Max stroke 110 mm; spring-return thrust 18.48–27.71 kN; hydraulic thrust 13.14–23.88 kN18.48–27.71 kN
VA-40L-280/110VA-40L-280/110Max stroke 110 mm; spring-return thrust 23.32–34.98 kN; hydraulic thrust 16.62–30.17 kN23.32–34.98 kN
VA-40L-320/110VA-40L-320/110Max stroke 110 mm; spring-return thrust 30.8–46.2 kN; hydraulic thrust 21.57–39.47 kN30.8–46.2 kN
VA-40L-350/110VA-40L-350/110Max stroke 110 mm; spring-return thrust 36.52–54.78 kN; hydraulic thrust 26.68–47.9 kN36.52–54.78 kN
VA-40L-400/110VA-40L-400/110Max stroke 110 mm; spring-return thrust 48.4–72.6 kN; hydraulic thrust 34.09–62.22 kN48.4–72.6 kN
VA-40L-450/110VA-40L-450/110Max stroke 110 mm; spring-return thrust 61.6–92.4 kN; hydraulic thrust 42.95–78.75 kN61.6–92.4 kN

All listed models can be supplied with your required certification, output protocol and process connection — contact us or request a quote for exact model-code selection.

Downloads & Documentation

Applications & Industries

  • Two-position (open/close) linear-stem valves that need a…

  • Emergency shutdown (ESD) and partial-stroke testing duty on…

  • Modulating control of linear-stem control valves with a…

  • Locations with electrical power but no compressed-air…

Reviews

No reviews yet

Be the first to review this product.

Frequently Asked Questions

Which valves can the VA-40L drive?

Per the datasheet it suits all valve types with a linear drive shaft (sliding-stem), with the valve stem vertical (up or down) or horizontal, with or without a mounting kit. Exact mechanical fit to your valve (bracket, stem, travel) is checked once you send the valve details.

What happens on loss of power or signal?

The return spring drives the valve to its safe position. The failure mode is set by the order code: fail-safe in the direction of the spring (open or closed) or last position; the spring return direction can be chosen as extend or retract.

Which control signals does it accept?

Digital input (open, close, maintain, ESD, partial stroke) or analogue modulating 4–20 mA or 0–10 VDC. The feedback output is 4–20 or 20–4 mA, from an isolated internal 24 VDC supply or an external one.

Does it carry an explosion-proof certificate (for example ATEX)?

The datasheet names an «Explosion Proof and IP65» version (code 1 in the order code) but cites no standard, certificate number or certifying body, so we do not claim any specific certification. For installation in a hazardous area, ask us for the certificate documents and we will request them from the manufacturer.

What are the price and lead time?

No price is shown; it is quoted on request. Please send the model (size), fail direction, available supply, signal type, stroke and valve stem diameter, and any order-code options you need.

Related Products

Cutaway of the PESA VA-10 piston actuator with labelled parts: cylinder, piston, piston O-ring, cap screw, yoke, stem connector, travel indicator

PESA (Pishro Sanat)PESA VA-10 / VA-10R Pneumatic Piston Actuator

Valve Actuators

Price on request

Yellow PESA VA31 (left) and VA32 (right) diaphragm actuators mounted on control valves with positioners

PESA (Pishro Sanat)PESA VA31 / VA32

Linear diaphragm actuator

Price on request

Render of the yellow PESA VA36 diaphragm rotary actuator, size 30, mounted on a V-notch rotary ball valve

PESA (Pishro Sanat)PESA VA35 / VA36

Diaphragm rotary actuator

Price on request