
PESA (Pishro Sanat)PESA VA-40L Smart Electro-Hydraulic Linear Valve Actuator
Valve Actuators
4–20 or 20–4 mA; isolated internal 24 VDC supply or external…
Price on request

PESA (Pishro Sanat Amal) double-acting linear piston actuator for sliding-stem control valves in on-off or throttling service: seven sizes (25 to 130) plus a Long-Stroke version to 610 mm travel, supply pressure up to 150 psig, and a spring-return VA-10R variant. Quoted on request only.
Price
Orderable, subject to confirmationPrice, availability and delivery time are stated after confirmation.
Ask on WhatsAppThis item is not held in Barmaan stock; it is sourced for you after confirmation. Final price and delivery time follow written confirmation.

Throttling or on-off control of sliding-stem control valves
High stem-force valves (such as unbalanced valves) where a…
Fail-safe duty with a bias spring (sizes 25 and 50) or a…
Long-travel valves up to 610 mm (Long-Stroke version)
PESA (Pishro Sanat Amal) double-acting linear piston actuator for sliding-stem control valves in on-off or throttling service: seven sizes (25 to 130) plus a Long-Stroke version to 610 mm travel, supply pressure up to 150 psig, and a spring-return VA-10R variant. Quoted on request only.
The VA-10 is a double-acting linear pneumatic piston actuator from Pishro Sanat Amal (brand PESA, Tehran) that gives accurate throttling or on-off operation of sliding-stem control valves. The family is built in sizes 25, 50, 60, 68, 80, 100 and 130 to cover a wide range of thrust and travel requirements. It is used with switching valves for on-off control, or with a positioner for throttling applications.
High thrust, long travel. Supply pressure goes up to 150 psig (10.3 bar); piston area runs from 168 to 1,430 cm², and the datasheet gives the maximum allowable thrust of size 130 as about 111,000 newtons (25,000 lbf). Standard travel is up to 203 mm (8 in) and the Long-Stroke version reaches 610 mm (24 in).
Double-acting air supply. Because the piston is driven by air in both directions, the positioner supplies air to both sides of the piston and the relatively small air volume in the cylinder gives stiff, precise positioning. For fail-safe action, sizes 25 and 50 are available with bias springs in two versions: in the VA-10 the spring sits under the piston and fully retracts the stem on loss of air, and in the VA-10R it sits on top of the piston and fully extends the stem; converting between them needs no extra parts. For larger sizes, a trip valve and tank system for failing up, down or locking in the last position is listed among the accessories.
Rugged construction. The yoke is ductile iron, the piston and cylinder are aluminum and the fasteners have a non-corroding finish; the standard O-ring is nitrile (fluorocarbon and EPDM optional). NAMUR positioner mounting is available on sizes 25 to 130 and the datasheet states vibration resistance per ISA-S75.13. A top-mounted handwheel is available for sizes 25 and 50 and a side-mounted handwheel for the other sizes.
Buying note. The content of this page comes only from the manufacturer's bulletin (July 2021) and no product certification or standard is claimed. Price and availability are provided on enquiry; please send the size, travel, stem diameter, air pressure and the fail-safe option you need.
| Attribute | Value |
|---|---|
| General | |
| Manufacturer | Pishro Sanat Amal Co. LTD (PESA), Tehran, Iran — pesa.ir |
| Models and sizes | VA-10 (spring under piston) and VA-10R (spring above piston) for sizes 25 and 50; sizes 25, 50, 60, 68, 80, 100, 130; plus a Long-Stroke version |
| Type | Double-acting linear pneumatic piston actuator for sliding-stem control valves; on-off or throttling (with positioner) service |
| Performance | |
| Pressure | Sizes 25–50: max 10.3 bar (150 psig), recommended minimum 1.4 bar (20 psig); sizes 60–130: minimum 2.4 bar (35 psig). Maximum design pressure is 10.3 bar; size 68 is limited to 9.7 bar and size 130 to 7.8 bar. |
| Piston area (cm²) | 25: 168 · 50: 303 · 60: 358 · 68: 571 · 80: 571 · 100: 842 · 130: 1430 |
| Maximum allowable thrust (N, springless) | 25: 17,300 · 50: 31,400 · 60: 36,900 · 68: 55,600 · 80: 58,700 · 100: 86,700 · 130: 111,200 |
| Travel | Standard: up to 203 mm (8 in); maximum 29 mm (size 25), 51 mm (50), 51/102/203 mm (60 and 68), 102/203 mm (80, 100, 130). Long-Stroke: 229 to 610 mm (9 to 24 in) |
| Stem and yoke boss diameter | Size 25: boss 54 or 71 mm / stem 9.5 or 12.7 mm; 50: 71 or 90 / 12.7 or 19.1; 60 and 68: 90 / 19.1; 80 and 100: 127 / 25.4 or 31.8; 130: 127 / 31.8 |
| Operating conditions | |
| Operating temperature | Nitrile O-rings: −46 to +80 °C; fluorocarbon (optional): −18 to +149 °C |
| Mechanical | |
| Air connection | 1/4 NPT internal (standard); 3/8 or 1/2 NPT optional on sizes 25 and 50 |
| Mounting | NAMUR positioner mounting on sizes 25 to 130, with vibration resistance per ISA-S75.13 |
| Weight | kg (without positioner and handwheel): 25: 7 or 8; 50: 20 or 22; 60: 31; 68: 54; 80: 102; 100: 113; 130: 188 |
| Materials & construction | |
| Main materials | Yoke: ductile iron; piston and cylinder: aluminum; bolting: NCF (non-corroding finish); springs (25 and 50): alloy steel; O-rings: nitrile (standard), fluorocarbon or EPDM; actuator stem 60–130: S41600 (416) stainless, chrome plated; cylinder seal bushings 60–130: brass |
| Options & accessories | |
| Handwheel | Top-mounted handwheel for sizes 25 and 50; side-mounted handwheel for the other sizes |
| Options | Digital positioner (HART or FOUNDATION Fieldbus), pneumatic and electropneumatic positioners, stem position switch (1 to 6 micro-switches), position transmitter, trip valve with tank (fail up/down/lock in last position), limit switches, cylinder bypass valve, bias spring (25 and 50) |
| Long-Stroke version | Fabricated structural-steel yoke; travel 229 to 610 mm in 25 mm steps; thrust up to 137,800 N; maximum cylinder pressure 17.2 bar for 127–305 mm cylinders; high-temperature seals to 177 °C optional; handwheel: 10 turns = 25 mm travel |
Sister models of this family — informational, not stock.
| Model code | Description | Measuring range |
|---|---|---|
| VA-10-25 | Size 25Piston area 168 cm²; max allowable thrust 17,300 N; weight 7–8 kg | 168 cm² |
| VA-10-50 | Size 50Piston area 303 cm²; max allowable thrust 31,400 N; weight 20–22 kg | 303 cm² |
| VA-10-60 | Size 60Piston area 358 cm²; max allowable thrust 36,900 N; weight 31 kg | 358 cm² |
| VA-10-68 | Size 68Piston area 571 cm²; max allowable thrust 55,600 N; weight 54 kg | 571 cm² |
| VA-10-80 | Size 80Piston area 571 cm²; max allowable thrust 58,700 N; weight 102 kg | 571 cm² |
| VA-10-100 | Size 100Piston area 842 cm²; max allowable thrust 86,700 N; weight 113 kg | 842 cm² |
| VA-10-130 | Size 130Piston area 1430 cm²; max allowable thrust 111,200 N; weight 188 kg | 1430 cm² |
| VA-10-LS | Long-StrokeTravel 229 to 610 mm; thrust up to 137,800 N | 229–610 mm |
All listed models can be supplied with your required certification, output protocol and process connection — contact us or request a quote for exact model-code selection.
Throttling or on-off control of sliding-stem control valves
High stem-force valves (such as unbalanced valves) where a…
Fail-safe duty with a bias spring (sizes 25 and 50) or a…
Long-travel valves up to 610 mm (Long-Stroke version)
No reviews yet
Be the first to review this product.
Both are spring versions for sizes 25 and 50. In the VA-10 the spring is under the piston and fully retracts the stem on loss of cylinder pressure; in the VA-10R it is on top of the piston and fully extends the stem. Per the bulletin, converting one to the other needs no additional parts.
Sizes 25 and 50 operate up to 10.3 bar (150 psig) with a recommended minimum of 1.4 bar; sizes 60 to 130 need at least 2.4 bar. Size 68 is limited to 9.7 bar and size 130 to 7.8 bar.
The maximum allowable thrust of size 130 is about 111,200 N. Standard travel is up to 203 mm (8 in); the Long-Stroke version offers 229 to 610 mm travel and thrust up to 137,800 N.
The bulletin mentions only vibration resistance of the NAMUR mounting per ISA-S75.13 and lists no product certification (such as CE, ATEX or ISO); we claim nothing further. Additional documents can be requested from the manufacturer on enquiry.
No price is shown; it is quoted on request. Please send the size, travel, stem and yoke boss diameters, available air pressure, fail-safe direction and accessories needed (positioner, handwheel, limit switches).

Valve Actuators
4–20 or 20–4 mA; isolated internal 24 VDC supply or external…
Price on request

Linear diaphragm actuator
Price on request

Diaphragm rotary actuator
Price on request