
Endress+HauserProline Promag W 800
Electromagnetic flowmeter
LTE Cat M1, Cat NB1, Cat NB2, GPRS, EGPRS; Modbus RS485; 3x…

The Promag D 10 is a highly cost-effective wafer electromagnetic flowmeter with an easy-to-use operating concept, for basic water applications with limited space and plastic-pipe installations.
Price
Out of stock — request a quote to sourceSubmit a quote request to get pricing.





Basic water applications with limited space and…

Drinking water, utility water and industrial or municipal…

Drinking-water distribution networks and utilities.
The Promag D 10 is a highly cost-effective wafer electromagnetic flowmeter with an easy-to-use operating concept, for basic water applications with limited space and plastic-pipe installations.
Endress+Hauser Proline Promag D 10 Electromagnetic Flowmeter: The Promag D 10 is a highly cost-effective wafer electromagnetic flowmeter with an easy-to-use operating concept, for basic water applications with limited space and plastic-pipe installations.
An electromagnetic flowmeter applies Faraday's law: a magnetic field is generated across the pipe, and an electrically conductive liquid moving through it induces a voltage proportional to the flow velocity, picked up by electrodes. The measuring tube has no constriction and no moving parts, so there is no pressure loss from the sensor and virtually no wear. According to the manufacturer, the bidirectional principle is virtually independent of pressure, density, temperature and viscosity.
Fast centering through an innovative housing construction, a short face-to-face length with low weight, integrated stainless-steel ground disks and guided commissioning via display or the SmartBlue app. Key figures from the official data: nominal diameter DN 25–100; maximum measured error ±0.5 % o.r. ± 1 mm/s; measuring range 9 dm³/min–282 m³/h; medium temperature 0…+60 °C; process pressure up to PN 16 / Class 150 / 10K.
Barmaan supplies this model by order code on inquiry; there is no list price on the page. Send the nominal diameter, medium, process connection and the required outputs, and we will confirm the configuration against the official Technical Information.
| Attribute | Value |
|---|---|
| General | |
| Measuring principle | Electromagnetic (Faraday), wafer design |
| Nominal diameter range | DN 25 to 100 (1 to 4") |
| Measured variables | Volume flow, mass flow |
| Degree of protection | IP66/67, type 4X enclosure |
| Approvals and certificates | Drinking water: KTW/BWGL; CSA GP; calibration to ISO/IEC 17025 |
| Official document | Technical Information TI01603D |
| Performance & accuracy | |
| Maximum measured error | Volume flow: ±0.5 % o.r. ± 1 mm/s (standard) |
| Measuring range | 9 dm³/min to 282 m³/h (2.5 to 1250 gal/min) |
| Process conditions | |
| Medium temperature range | Polyamide liner: 0 to +60 °C |
| Maximum process pressure | PN 16, Class 150, 10K |
| Wetted materials | Liner: polyamide; electrodes: 1.4435 (316L); sensor housing: AlSi10Mg, coated |
| Electrical & communication | |
| Display / operation | LCD display with touch and auto-rotate; compact or remote version |
| Digital communication | HART, Modbus RS485, IO-Link; 4–20 mA; pulse/frequency/switch output |
| Power supply | DC 24 V; AC 100 to 230 V |

Basic water applications with limited space and…

Drinking water, utility water and industrial or municipal…

Drinking-water distribution networks and utilities.
No reviews yet
Be the first to review this product.
Electrically conductive liquids, e.g. water, wastewater and many process liquids. It cannot measure non-conductive liquids such as pure hydrocarbons or gases.
No. The measuring tube has no cross-section constriction, so the sensor itself causes no pressure loss, and it has no moving parts to maintain.
The approvals differ per model and liner; the model-specific drinking-water or hygienic approvals the manufacturer lists are in the specification table and the Technical Information.
HART, Modbus RS485 and IO-Link, with 4–20 mA and pulse/frequency/switch outputs, powered by DC 24 V or AC 100 to 230 V.
The official Endress+Hauser Technical Information TI01603D is attached in the downloads section of this page, so you have the full specification and ordering information.
Pricing depends on nominal diameter, process connection, materials, approvals and the transmitter configuration (order code). Send us your requirements and we quote it on request.

Electromagnetic flowmeter
LTE Cat M1, Cat NB1, Cat NB2, GPRS, EGPRS; Modbus RS485; 3x…

Electromagnetic flowmeter
HART, PROFIBUS DP, EtherNet/IP, Modbus RS485; 0/4–20 mA HART…

Electromagnetic flowmeter
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

Coriolis flowmeter
4–20 mA HART + Pulse/Frequency (I-OUT, f-OUT)
Ships in 1 day
from $4,000

Energy meter + ultraflow flow sensor
M-Bus, wireless M-Bus, Modbus, BACnet, LoRa … (2 module slots)

Coriolis flowmeter
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

Ultrasonic clamp-on flowmeter

Coriolis flowmeter
HART, PROFIBUS DP/PA, FOUNDATION Fieldbus, Modbus RS485, Modbus…

Coriolis flowmeter
Calibration, testing and supply services for this equipment